-
(1-Pyrene)methyl Methacrylate
- names:
(1-Pyrene)methyl Methacrylate
- CAS号:
86112-79-0
MDL Number: - MF(分子式): C21H16O2 MW(分子量): 300.35
- EINECS: Reaxys Number:
- Pubchem ID: Brand:BIOFOUNT
| 货品编码 | 规格 | 纯度 | 价格 (¥) | 现价(¥) | 特价(¥) | 库存描述 | 数量 | 总计 (¥) |
|---|---|---|---|---|---|---|---|---|
| HCC342123-250mg | 250mg | 97% | ¥ 1662.50 | ¥ 1662.50 | 4-7周 | ¥ 0.00 |
| 中文别名 | (1-Pyrene)methyl Methacrylate |
| 英文别名 | 1-Pyrenylmethyl methacrylate |
| CAS号 | 86112-79-0 |
| Inchi | InChI=1S/C21H16O2/c1-13(2)21(22)23-12-17-9-8-16-7-6-14-4-3-5-15-10-11-18(17)20(16)19(14)15/h3-11H,1,12H2,2H3 |
| InchiKey | BUQDPCFXOBQDLX-UHFFFAOYSA-N |
| 分子式 Formula | C21H16O2 |
| 分子量 Molecular Weight | 300.35 |
| 溶解度Solubility | DMSO (Slightly), Ethyl Acetate (Slightly) |
| 性状 | |
| 储藏条件 Storage conditions | -20?C Freezer |
| 产品说明 | (1-Pyrene)methyl Methacrylate(CAS:86112-79-0):仅限应用于工业或者科学研究过程中非医疗目的,不应用于人类或动物的临床诊断以及治过程疗,该产品非药用,非食用。 |
| Introduction | (1-Pyrene)methyl Methacrylate(CAS:86112-79-0):only use for non-medical purposes in industrial or scientific research, and not for clinical diagnosis and treatment of humans or animals. This product is not medicinal or edible. |
| Application1 | |
| Application2 | |
| Application3 |
| 警示图 | |
| 危险性 | warning |
| 危险性警示 | Not available |
| 安全声明 | H303+H313+H333 |
| 安全防护 | P264+P280+P305+P351+P338+P337+P313 |
| 备注 | 实验过程中防止吸入、食入,做好安全防护 |
实验注意事项:
1.实验前需戴好防护眼镜,穿戴防护服和口罩,佩戴手套,避免与皮肤接触。
2.实验过程中如遇到有毒或者刺激性物质及有害物质产生,必要时实验操作需要手套箱内完成以免对实验人员造成伤害
3.实验后产生的废弃物需分类存储,并交于专业生物废气物处理公司处理,以免造成环境污染。
Experimental considerations:
1. Wear protective glasses, protective clothing and masks, gloves, and avoid contact with the skin during the experiment.
2. The waste generated after the experiment needs to be stored separately, and handed over to a professional biological waste gas treatment company to avoid environmental pollution.
1.实验前需戴好防护眼镜,穿戴防护服和口罩,佩戴手套,避免与皮肤接触。
2.实验过程中如遇到有毒或者刺激性物质及有害物质产生,必要时实验操作需要手套箱内完成以免对实验人员造成伤害
3.实验后产生的废弃物需分类存储,并交于专业生物废气物处理公司处理,以免造成环境污染。
Experimental considerations:
1. Wear protective glasses, protective clothing and masks, gloves, and avoid contact with the skin during the experiment.
2. The waste generated after the experiment needs to be stored separately, and handed over to a professional biological waste gas treatment company to avoid environmental pollution.
| Fluorescence of Polymers at Interfaces: Polymerization, Relaxations, and Imaging,Reviews in Fluorescence 2010[DOI: 10.1007978-1-4419-9828-6_13] |
| Preparation of polystyrenepoly(methyl methacrylate) composite particles having a dent,Colloid and Polymer Science[DOI: 10.1007s00396-004-1209-x] |
| Glass transition and quantum yield for fluorescent labelled polystyrene core-forming block in self-assembled nanomicelles of amphiphilic diblock copolymers,Journal of Polymer Research[DOI: 10.1007s10965-015-0855-7] |
| Insitu fluorescence probing of the chemical and structural changes during formation of hexagonal phase cetyltrimethylammonium bromide and lamellar phase CTABPoly(dodecylmethacrylate) solu2013gel silica thin films,Journal of Sol-Gel Science and Technology[DOI: 10.1007s10971-008-1755-7] |
| Chemical Imaging of Phase-Separated Polymer Blends by Fluorescence Microscopy,Journal of Fluorescence[DOI: 10.1023A:1009439024969] |
对不起,暂无产品评价!
MSDS
SDS 1.0 中文
展开
SDS 1.0 英文
展开
- 相关产品
-
< >
- 推荐产品
-
< >
- 最新产品
-
< >
新闻
抱歉,暂无数据!


购物车 


