1406-65-1|叶绿素(合计叶绿素:约0.5%)|Chlorophyll|MFCD00071051-范德生物科技公司

叶绿素(合计叶绿素:约0.5%)
NMR and HPLC COA下载 MSDS下载
Names：
Chlorophyll
CAS号：
1406-65-1
MDL Number： MFCD00071051
MF(分子式)： NA MW(分子量)： NA
EINECS: Reaxys Number:
Pubchem ID:12085802 Brand:BIOFOUNT

货品编码	规格	纯度	价格 (¥)	现价(¥)	特价(¥)	库存描述	数量	总计 (¥)
HXH501643-25g	25g	生物技术级	¥ 1008.00	¥ 1008.00		1-2days	- +	¥ 0.00

大包装询价提供各种包装，敬请垂询
收藏商品商品点评加入购物车立即购买

快速询价

收起

你想询价的产品

*产品名称：

CAS号：

产品编号：

需求描述：

请准确填写您的联系方式，以便为您提供最好的服务。

*公司名称：

*电子邮箱：

联系人：

*电话：

*验证码：

询价

中文别名	叶绿素(合计叶绿素:约0.5%):(1406-65-1)
英文别名	Chlorophyll:(1406-65-1)
CAS号	1406-65-1
SMILES	CCC1=C(C2=NC1=CC3=C(C4=C([N-]3)C(=C5C(C(C(=N5)C=C6C(=C(C(=C2)[N-]6)C=C)C)C)CCC(=O)OCC=C(C)CCCC(C)CCCC(C)CCCC(C)C)C(C4=O)C(=O)OC)C)C.[Mg+2]
Inchi	InChI=1S/C55H73N4O5.Mg/c1-13-39-35(8)42-28-44-37(10)41(24-25-48(60)64-27-26-34(7)23-17-22-33(6)21-16-20-32(5)19-15-18-31(3)4)52(58-44)50-51(55(62)63-12)54(61)49-38(11)45(59-53(49)50)30-47-40(14-2)36(9)43(57-47)29-46(39)56-42;/h13,26,28-33,37,41,51H,1,14-25,27H2,2-12H3,(H-,56,57,58,59,61);/q-1;+2/p-1/b34-26+;/t32-,33-,37+,41+,51-;/m1./s1
InchiKey	NSMUHPMZFPKNMZ-VBYMZDBQSA-M
分子式 Formula	NA
分子量 Molecular Weight	NA
闪点 FP	No date available
熔点 Melting point	No date available
沸点 Boiling point	No date available
Polarizability极化度	No date available
密度 Density	No date available
蒸汽压 Vapor Pressure	No date available
溶解度Solubility	No date available
性状	Solid
储藏条件 Storage conditions	storage at -4℃ (1-2weeks), longer storage period at -20℃ (1-2years)

实验注意事项：
1.实验前需戴好防护眼镜，穿戴防护服和口罩，佩戴手套，避免与皮肤接触。
2.实验过程中如遇到有毒或者刺激性物质及有害物质产生，必要时实验操作需要手套箱内完成以免对实验人员造成伤害
3.实验后产生的废弃物需分类存储，并交于专业生物废气物处理公司处理，以免造成环境污染Experimental considerations:
1. Wear protective glasses, protective clothing and masks, gloves, and avoid contact with the skin during the experiment.
2. The waste generated after the experiment needs to be stored separately, and handed over to a professional biological waste gas treatment company to avoid environmental pollution.

产品说明	叶绿素(合计叶绿素:约0.5%):(1406-65-1)用于科学研究及合成中间体,1406-65-1其他参数见主页
Introduction	Chlorophyll:(1406-65-1)Used in scientific research and synthetic intermediates,1406-65-1 See homepage for other parameters
Application1
Application2
Application3

警示图
危险性	warning
危险性警示	Not available
安全声明	H303+H313+H333
安全防护	P264+P280+P305+P351+P338+P337+P313
备注	实验过程中防止吸入、食入，做好安全防护

对不起，暂无产品评价！

MSDS

SDS 1.0 中文

展开

Ren 化学品安全技术说明书			版本：1.0
按照GB/T16483、GB/T17519编制			修订日期：10.07.2019
			打印日期：19.02.2020
版权所有：范德（北京）生物科技有限责任公司			最初编制日期：25.05.2017
公司网站：WWW.BIO-FOUNT.COM			SDS编号：BIOFOUNT-LSH40001
版权所有：BIOFOUNT BEIJING BIO TECH CO.,LTD			产品编号：LSH40001
1-(2-ethylphenyl)-1H-1,2,3-triazole-4-carbaldehyde
说明书目录
第1部分	化学品及企业标识		第2部分	危险性概述
第3部分	成分/组成信息		第4部分	急救措施
第5部分	消防措施		第6部分	泄露应急处理
第7部分	操作处置与储存		第8部分	接触控制/个体防护
第9部分	理化性质		第10部分	稳定性和反应性
第11部分	毒理学信息		第12部分	生态学危害信息
第13部分	废弃处置		第14部分	运输信息
第15部分	法律法规信息		第16部分	其他补充信息
第1部分：化学品及企业标识
1.1 产品标识
产品名称：		1-(2-ethylphenyl)-1H-1,2,3-triazole-4-carbaldehyde
ENGLISH NAME：		1-(2-ethylphenyl)-1H-1,2,3-triazole-4-carbaldehyde
产品编号：		LSH40001
品牌：		BIOFOUNT
化学文摘登记号(CAS NO.)：		1486425-01-7
1.2 安全技术说明书提供者的详情
制造商或供应商名称：		BIOFOUNT BEIJING BIO-TECH CO.,LTD
制造地址：		59 KANGTAI AVENUE BINHAI NEW DISTRICT TIANJIN 300450 TIANJIN CHINA 范德(天津)生物科技有限责任公司天津市滨海新区康泰大道59号九州通绿谷健康产业园邮政编码：300450
电话号码：
1.3 应急咨询电话
紧急联系电话：
1.4 物质或混合物的推荐用途和限制用途
已确认的各用途：		仅用于科学研发，不作为药品、家庭或其它用途。
第2部分：危险性概述
2.1 GHS危险性类别
暂无数据
2.2 GHS 标签要素，包括防范说明
象形图
暂无数据
信号词
warning
危险申明
H303如果吸食，很可能出现危险+H313如果与皮肤接触，很可能出现危险+H333如果吸入，很可能出现危险
警告申明
避免吸入,误食以及与皮肤接触
预防措施
P201+P260+P281+P284
事故响应
1.化学品使用过程中，当出现事故或者有紧急情况发生时，当事人应第一时间向应急小组负责人汇报后，由应急小组采取措施防止事态扩大。2.应急小组对受害人采取救护措施。
储存
暂无数据
废弃处置
实验废弃物应交由有资质的化学品废弃物处理机构处理。
2.3 物理和化学危险
暂无数据
2.4 健康危害
暂无数据
2.5 环境危害
暂无数据
2.6 其它危害物
暂无数据
第3部分：成分/组成信息
物质/混合物		暂无数据
3.1 物质
分子式		C11H11N3O
分子量		201.225
化学文摘登记号(CAS NO.)		1486425-01-7
EC-编号		暂无数据
根据相应法规，无需披露具体组份。
第4部分：急救措施
4.1 必要的急救措施描述
吸入
立即将患者移至空气新鲜处，发现呼吸困难时，必须立即采取吸氧处理，停止呼吸时采取人工呼吸。同时联系及时就医。
皮肤接触
立即脱去或者剪去污染的衣物，迅速用大量的流动清水冲10-20分钟甚至更长时间后，赴医院就医。
眼睛接触
立即用大量的流动清水冲10-20分钟后赴医院就医处理。
食入
误食化学物品后，应立即采取措施进行催吐。1.若误食化学品呈酸性，则可服用大量牛奶和水，促使食如折呕吐。2.若误食化学品呈碱性，则可服用大量牛奶、清水和醋，促使其呕吐，紧急处理后，应及时送至医院进行治疗（仅供参考）。食如者昏迷状态下禁止催吐，以免造成窒息。
4.2 最重要的症状和健康影响
最重要的已知症状及作用已在标签（参见章节2.2）和/或章节11中介绍
4.3 及时的医疗处理和所需的特殊处理的说明和指示
暂无数据
4.4 对医生的特别提示
暂无数据
第5部分：消防措施
5.1 灭火介质
灭火方法及灭火剂
采用泡沫灭火器、二氧化碳灭火器，避免造成二次污染发生。
5.2 源于此物质或混合物的特别的危害
暂无数据
5.3 灭火注意事项及保护措施
小规模着火需戴好口罩，防止有毒气体吸入。火灾发生时及时启动应急相应系统撤离至上风口处，并联系当地消防部门灭火。
第6部分：泄露应急处理
6.1 人员防护措施、防护装备和应急处置程序
1.泄露后首先启动应急相应系统2.泄露处理前，需穿戴好安全安全防护鞋、穿戴好安全防护手套（强酸性物质需穿戴防酸碱手套）、根据吸入危险性穿戴相应防护面罩。有关个人防护，请看第8部分。
6.2 环境保护措施
参照《范德生物化学废弃物处理方法》处理，防止对环境造成危害，处理后交由有资质的废弃物处理结构进行处理，以免造成环境污染。
6.3 泄漏化学品的收容、清除方法及所使用的处置材料
参照《范德生物化学品废弃物处理方法》对泄露的化学品进行处理，处理前需用化学品吸附岩棉对泄露区域进行围挡，形成“围堰”防止泄露扩大。
6.4 参考其他部分
丢弃处理请参阅第13节。
第7部分：操作处置与储存
7.1 安全操作的注意事项
使用过程请穿戴好口罩，手套等防护用品，避免与皮肤接触、吸入、误食危险。有关预防措施，请参见章节2.2。
7.2 安全储存的条件,包括任何不兼容性
暂时无法提供详细数据,尽可能避免与其他化合物混合存储，避光、通风处存储。
第8部分：接触控制/个体防护
8.1 控制参数
危害组成及职业接触限值
暂无数据
8.2 暴露控制
适当的技术控制
暂无数据
个体防护装备
眼面防护一般情况下穿戴安全防护眼镜即可，如有飞溅液体、粉末产生时，请佩戴防溅面罩进行防护。穿戴的防护用品需取得如：GB、NIOSH (美国) 或 EN 166(欧盟) 等相关认证。
皮肤保护手套脱去注意事项：手套在使用前必须进行检查，请使用正确的方法脱除手套(不接触手套外部表面)，避免身体任何皮肤部位接触到此产品。根据相关法律法规和实验室管理规范制度，手套使用过后，请将被污染的手套谨慎处理，工作后清洗并吹干双手。所选择的保护手套必须符合法规《劳动防护用品配备标准》、(EU)2016/425以及从此类法规衍生出来的EN 374标准规范。完全接触保护要求：手套材料：丁腈橡胶手套最小的层厚度：0.11 MM 手套溶剂渗透时间：480 分钟飞溅保护要求：材料：丁腈橡胶最小的层厚度 0.11 MM 溶剂渗透时间：480 分钟如果以溶剂形式应用或与其它物质混合应用，或在不同于《劳动防护用品配备标准》，EN 374规定的条件下应用，请与EC批准的手套的供应商联系。该条只是作为推荐性建议，如遇特殊情况，务必请熟悉该产品属性的专家，选取相关防护用品。此条建议不应该被认定为适应所有特殊条件防护，请根据所处工作条件请求专业工程师指导采取相应防护措施。
身体保护选择身体部分的防护措施，需要根据危险物质的类型、浓度、量以及特定的工作环境。身体部分防护设备、防护服的类型，必须根据使用者工作场所中的危险物质的浓度、数量进行选择。
呼吸系统防护一般情况下穿戴普通的医用口罩保护呼吸系统即可。有酸雾产生式活性炭类口罩起不到防护作用，如需对粉尘造成损害进行防护时，请采用N95型（US）或P1型（EN 143)类口罩或者防尘面具。特殊情况下使用自吸式呼吸器时，使用的呼吸器必须对呼吸器密闭性、空气供应系统、供气压进行测试，当然呼吸器需通过强制认证标准如：GB、NIOSH（US）、CEN（EU）。
环境暴露的控制
不要让产品进入下水道。
第9部分：理化特性
9.1 基本的理化特性的信息
外观与性状		形状：暂无数据
		颜色：暂无数据
气味		暂无数据
气味阈值		暂无数据
PH值		暂无数据
熔点/凝固点		Not available
初沸点和沸程		384.3±44.0 °C at 760 mmHg
闪点		186.2±28.4 °C
蒸发速率		暂无数据
易燃性(固体,气体)		暂无数据
高的/低的燃烧性或爆炸性限度		暂无数据
蒸气压		0.0±0.9 mmHg at 25°C
蒸气焓		63.3±3.0 kJ/mol
密度/相对密度		1.2±0.1 g/cm3
溶解度		Not available
正辛醇/水分配系数		暂无数据
正辛醇空气分配系数		暂无数据
自燃温度		暂无数据
分解温度		暂无数据
黏度		暂无数据
爆炸特性		暂无数据
氧化性		暂无数据
根据碎片估算水溶胶		暂无数据
亨利定律常数（25摄氏度）		暂无数据
9.2 其他安全信息
暂无数据
第10部分：稳定性和反应性
10.1 稳定性
暂无数据
10.2 危险反应
暂无数据
10.3 应避免的条件
暂无数据
10.4 禁配物
强氧化剂
10.5 危险的分解产物
暂无数据
第11部分：毒理学信息
11.1 毒理学影响信息
毒性
暂无数据
皮肤腐蚀/刺激
暂无数据
严重眼睛损伤/眼刺激
暂无数据
呼吸或皮肤过敏
暂无数据
生殖细胞致突变性
暂无数据
致癌性
暂无数据
生殖毒性
暂无数据
特异性靶器官系统毒性（一次接触）
暂无数据
特异性靶器官系统毒性（反复接触）
暂无数据
吸入危害
暂无数据
附加说明
暂无数据
第12部分：生态学危害信息
12.1 生态毒性
暂无数据
12.2 持久性和降解性
暂无数据
12.3 快速生物降解的可能性
暂无数据
12.4 专家调查生物降解结果
暂无数据
12.5 MITI生物降解的可能性
暂无数据
12.6 厌氧生物降解的可能性
暂无数据
12.7 现成的生物降解性预测
暂无数据
12.8 碳氢化合物生物降解
暂无数据
12.9 对气溶胶的吸附
暂无数据
12.10 羟基自由基反应
暂无数据
12.11 臭氧反应
暂无数据
12.12 空气中颗粒物吸附的分数（PHI）
暂无数据
12.13 土壤吸附系数
暂无数据
12.14 碱/酸催化水解（25℃）
暂无数据
12.15 利用对数KOW估算生物累积量
暂无数据
12.16 废水处理中的去除
暂无数据
12.17 三级逸度模型
暂无数据
12.18 土壤中的迁移性
暂无数据
12.19 PBT和VPVB的结果评价
暂无数据
12.20 其他环境有害作用
暂无数据
第13部分：废弃处置
13.1 废物处理
方法产品
None
污染包装物
None
第14部分：运输信息
14.1 联合国编号 / UN NUMBER
欧洲陆运危规 / ER/RID：		None
国际海运危规 / IMDG：		None
国际空运危规 / IATA-DGR：		None
14.2 联合国运输名称 / UN PROPER SHIPPING NAME
欧洲陆运危规：		None
国际海运危规：		None
国际空运危规：		None
14.3 运输危险类别 / TRANSPORT HAZARD CLASS(ES)
欧洲陆运危规 / ER/RID：		None
国际海运危规 / IMDG：		None
国际空运危规 / IATA-DGR：		None
14.4 包裹组 / PACKAGING GROUP
欧洲陆运危规 / ER/RID ：		None
国际海运危规 / IM0DG：		None
国际空运危规 / IATA-DGR：		None
14.5 环境危害 / ENVIRONMENTAL HAZARDS
None
14.6 特殊防范措施 / SPECIAL PRECAUTIONS FOR USER
None
14.7 禁配物 / INCOMPATIBLE MATERIALS
None
第15部分：法律法规信息
15.1 专门对此物质或混合物的安全，健康和环境的规章/法规
适用法规
《中华人民共和国安全生产法》、《职业病防治法》、《化学化工实验室安全管理规范》
其它的规定
《生产安全事故报告和调查处理条例》、《职业病防治法》、《职业安全和卫生法》美国1970
第16部分：其他补充信息
其他信息版权所有：BIOFOUNT BEIJING BIO TECH CO.,LTD 公司。许可无限制纸张拷贝，仅限于内部使用。上述信息视为正确，但不包含所有的信息，仅作为指引使用。本文件中的信息是基于我们目前所知，就正确的安全提示来说适用于本品。该信息不代表对此产品性质的保证。BIOFOUNT公司及其附属公司对任何操作或者接触上述产品而引起的损害不负有任何责任。更多使用条款，参见发票或包装条的反面。更多销售条款及条件请参见HTTP://WWW.BIO-FOUNT.COM/或发票或装箱单的背面。欲悉详情，请联系：SALES@BIO-FOUNT.COM

SDS 1.0 英文

展开

Chemical safety technical specification					Edition：1.0
Prepared according to GB/T16483、GB/T17519					Revision date：10.07.2019
					Date of printing：19.02.2020
					Date of initial preparation：25.05.2017
WEB：www.bio-fount.com					SDS number：BIOFOUNT-HXH501643
Copyright: BIOFOUNT BEIJING BIO TECH CO.,LTD					Product number：BIOFOUNT-HXH501643
Chlorophyll
List of instructions
Part 1	chemicals and enterprise logo				Part 2	risk overview
Part 3	Composition / composition information				Part 4	first aid measures
Part 5	fire fighting measures				Part 6	Leakage Emergency Treatment
Part 7	handling and storage				Part 8	exposure control / personal protection
Part 9	physical and chemical properties				Part 10	stability and reactivity
Part 11	toxicological information				Part 12	ecological hazard information
Part 13	waste disposal				Part 14	Transport Information
Part 15	information on laws and regulations				Part 16	other supplementary information
Part 1: chemicals and enterprise logo
1.1 product identification
Product Name:				Chlorophyll
English Name：				Chlorophyll
Product No.:				HXH501643
Brand:				BIOFOUNT
(CAS No.)：				1406-65-1
1.2 details of suppliers of safety technical specifications
Name of manufacturer or supplier:				BIOFOUNT BEIJING BIO-TECH CO.,LTD
Manufacturing address:				59 Kangtai Avenue Binhai New District Tianjin 300450 TIANJIN CHINA BIOFOUNT (Tianjin) Biotechnology Co., Ltd Jiuzhou tonglvgu Health Industrial Park, No. 59, Kangtai Avenue, Binhai New Area, Tianjin Post code: 300450
Phone number:
1.3 emergency consultation telephone
Emergency contact number:
1.4 recommended and restricted uses of the substance or mixture
Identified uses:				It is only used for scientific research and development, not for medicine, family or other purposes.
Part 2: risk overview
2.1 hazard categories of GHS
No data available
2.2 GHS labeling elements, including precautionary statements
Pictogram
No data available
Signal word
No data available
Declaration of danger
No data available
Warning statement
No data available
preventive measure
No data available
Accident response
1. In case of accident or emergency during the use of chemicals, the party concerned shall report to the person in charge of the emergency response team as soon as possible, and the emergency response team shall take measures to prevent the situation from expanding. 3. The emergency team shall take rescue measures for the victims.
Storage
No data available
Waste disposal
No data available
2.3 physical and chemical hazards
No data available
2.4 health hazards
No data available
2.5 environmental hazards
No data available
2.6 other hazards
No data available
Part 3: Composition / composition information
Substance / mixture				material
3.1 substances
Molecular formula				No data available
molecular weight				No data available
（CAS No.）				1406-65-1
EC- number				No data available
According to the corresponding regulations, there is no need to disclose specific components.
Part 4: first aid measures
4.1 description of necessary first aid measures inhalation
inhalation
Inhalation: Immediately leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing.
Skin contact
Skin:Immediately flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, Immediately call a physician and be prepared to transport the victim to a hospital for treatment.
Eye contact
eyes: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. Immediately transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
Ingestion
Ingestion: Do not induce vomiting,If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and Immediately call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT Induce vomiting.Immediately transport the victim to a hospital.
4.2 most important symptoms and health effects
The most important known symptoms and effects are described in the label (see Chapter 2.2) and / or Chapter 11
4.3 instructions and instructions for timely medical treatment and special treatment required
No data available
4.4 special tips for doctors
No data available
Part 5: fire fighting measures
5.1 extinguishing media
Fire extinguishing method and agent
Fires involving this compound should be controlled using a dry chemical, carbon dioxide, foam or Halon extinguisher.
5.2 special hazards from this substance or mixture
No data available
5.3 precautions and protection measures for fire fighting
In case of small-scale fire, masks shall be worn to prevent the inhalation of toxic gas. In case of fire, the emergency response system shall be started in time to evacuate to the upper air outlet, and the local fire department shall be contacted to put out the fire.
Part 6: Leakage Emergency Treatment
6.1 personnel protection measures, protective equipment and emergency disposal procedures
1. Start the emergency response system first after leakage. 2. Before leakage treatment, wear safety protection shoes, safety protection gloves (anti acid and alkali gloves are required for strong acid substances), and wear corresponding protective masks according to the inhalation risk. For personal protection, see Part 8.
6.2 environmental protection measures
Refer to the treatment method of Fande biochemical waste to prevent harm to the environment. After treatment, the waste shall be treated by a qualified waste treatment structure to avoid environmental pollution.
6.3 storage, removal methods and disposal materials of leaked chemicals
The leaked chemicals shall be treated according to the treatment method of Fande biological chemical waste. Before treatment, the leaking area shall be enclosed with chemical absorbent rock wool to form a "cofferdam" to prevent the leakage from expanding.
6.4 reference to other parts
See section 13 for disposal.
Part 7: handling and storage
7.1 precautions for safe operation
Please wear masks, gloves and other protective articles during use to avoid contact with skin, inhalation and accidental ingestion. See Section 2.2 for precautions.
7.2 conditions for safe storage, including any incompatibility
It is unable to provide detailed data for the time being. Try to avoid mixed storage with other compounds and storage in dark and ventilated places.
Part 8: exposure control / personal protection
8.1 control parameters
Hazard composition and occupational exposure limit
No data available
8.2 exposure control
Appropriate technical controls
No data available
Personal protective equipment
Eye protection Please use equipment tested and approved by official standards such as NIOSH (USA) or en 166 (EU) for eye protection.
Skin protection Take out by hand: gloves must be inspected before use. Please use proper methods to remove the gloves (do not touch the outer surface of the gloves), and avoid any skin parts contacting the product. After use, please handle the contaminated gloves carefully according to relevant laws and regulations and effective laboratory rules and procedures. Please wash and dry your hands. The selected protective gloves must meet the specifications given in regulation (EU) 2016 / 425 and the en 374 standard derived from it. Full contact Material: NBR Minimum layer thickness 0.11 mm Solvent penetration time: 480 minutes Splash protection Material: NBR Minimum layer thickness 0.11 mm Solvent penetration time: 480 minutes If applied in solvent form or mixed with other substances, or under conditions different from those specified in en 374, please contact the supplier of gloves approved by EC. This recommendation is only suggestive and must be evaluated and confirmed by an industrial hygiene expert familiar with the specific situation our customer plans to use. This should not be interpreted as providing approval for any particular usage method.
Body protection Choose physical protection measures according to the type, concentration and quantity of hazardous substances and specific workplace. The type of protective equipment must be selected according to the concentration and quantity of hazardous substances in the specific workplace.
respiratory system protection There is no need to protect breathing. To protect against dust damage, use N95 (US) or P1 (EN 143) dust masks. Respirators use respirators and parts that have been tested and passed government standards such as NIOSH (US) or cen (EU).
Control of environmental exposure
Do not let the product into the sewer.
Part 9: physical and chemical properties
9.1 information on basic physical and chemical properties
Appearance and character			shape：No data available
			colour：No data available
smell			No data available
Odor threshold			No data available
PH value			No data available
Melting point / freezing point			No data available
Initial boiling point and boiling range
flash point
Evaporation rate			No data available
Flammability (solid, gas)			No data available
High / low flammability or explosive limits			No data available
Vapor pressure			No data available
Vapor density			No data available
Density / relative density			No data available
Water solubility			No data available
Partition coefficient of n-octanol / water			Log POW:
Air distribution coefficient of n-octanol			No data available
Spontaneous combustion temperature			No data available
decomposition temperature			No data available
viscosity			No data available
Explosion characteristics			No data available
Oxidizing			No data available
Estimation of hydrosol from fragments			No data available
Henry's law constant (25 ℃)			No data available
9.2 other safety information
No data available
Part 10: stability and reactivity
10.1 stability
No data available
10.2 hazardous reactions
No data available
10.3 conditions to avoid
No data available
10.4 prohibited substances
Strong oxidant
10.5 hazardous decomposition products
No data available
Part 11: toxicological information
11.1 toxicological impact information
toxicity
No data available
Skin corrosion / irritation
No data available
Serious eye injury / eye irritation
No data available
Respiratory or skin allergies
No data available
Germ cell mutagenicity
No data available
carcinogenicity
No data available
Reproductive toxicity
No data available
Specific target organ systemic toxicity (one exposure)
No data available
Specific target organ systemic toxicity (repeated exposure)
No data available
Inhalation hazard
No data available
Additional description
No data available
Part 12: ecological hazard information
12.1 ecotoxicity
No data available
12.2 durability and degradability
No data available
12.3 possibility of rapid biodegradation
No data available
12.4 expert investigation of biodegradation results
No data available
12.5 possibility of MITI biodegradation
No data available
12.6 possibility of anaerobic biodegradation
No data available
12.7 ready made biodegradability prediction
No data available
12.8 hydrocarbon biodegradation
No data available
12.9 adsorption of aerosols
No data available
12.10 hydroxyl radical reaction
No data available
12.11 ozone reaction
No data available
12.12 fraction of particulate adsorption in air (PHI)
No data available
12.13 soil adsorption coefficient
No data available
12.14 alkali / acid catalyzed hydrolysis (25 ℃)
No data available
12.15 estimating bioaccumulation using log Kow
No data available
12.16 removal in wastewater treatment
No data available
12.17 three level fugacity model
No data available
12.18 mobility in soil
No data available
12.19 evaluation of PBT and vpvb results
No data available
12.20 other harmful effects on the environment
No data available
Part 13: waste disposal
13.1 waste treatment
Product method
None
Contaminated packaging
None
Part 14: Transport Information
14.1 UN number
ADR/RID：		None
IMDG：			None
IATA-DGR：			None
14.2 UN proper shipping name
ADR/RID：			None
IMDG：			None
IATA-DGR：			None
14.3 Transport hazard class(es)
ADR/RID：			None
IMDG：			None
IATA-DGR：			None
14.4 Packaging group
ADR/RID ：			None
IM0DG：			None
IATA-DGR：			None
14.5 Environmental hazards
None
14.6 Special precautions for user
None
14.7 Incompatible materials
None
Part 15: information on laws and regulations
15.1 rules / regulations specific to the safety, health and environment of the substance or mixture
Applicable laws and regulations
None
Other provisions
None
Part 16: other supplementary information
Other information Copyright:FOUNT BEIJING BIO TECH CO.,LTD. Unlimited paper copies are permitted, for internal use only. The above information is deemed to be correct, but does not contain all information. It is only used as a guide. The information in this document is based on what we know at present and is applicable to this product in terms of correct safety tips. This information does not guarantee the nature of this product. Biofount and its affiliates shall not be liable for any damage caused by any operation or contact with the above products. For further terms of use, see the reverse side of the invoice or packing slip. For further terms and conditions of sale, please refer to http://www.bio-foundation.com/ or the back of the invoice or packing list. The logo on the header or footer of this document may temporarily not visually match the product purchased as we are transitioning our brand. However, all information about the products in this article remains unchanged and is consistent with the products ordered. For more information, please contact: sales@bio-foundation.com